ADDRESS
GEMA-Technik GmbH
Gutenbergstr. 17
83052 Bruckmühl
Tel.: +49 (0) 8062 - 7251 0
Fax: +49 (0) 8062 - 7251 299
ADDRESS
GEMA-Technik GmbH
Gutenbergstr. 17
83052 Bruckmühl
Tel.: +49 (0) 8062 - 7251 0
Fax: +49 (0) 8062 - 7251 299
Plastic Hose Nipples for passing Air through
Plastic hose nipples with encased metallic seal seat and 3 encased threaded inserts. Medium to be passed through: Air
Connection Pieces for passing Air through
Plastic connection pieces for passing air through, equipped with 2 metallic support bushings for fixation at the engine.
Holder for passing Coolants through
Holder that is equipped with a curved tube for passing coolants through. The component also consists of 2 encased threaded inserts and 2 subsequently mounted slit support bushings as well as one O-ring.
Small Components
Part weights of < 0.5g possible
Sensor System
Used as speed sensor for utility vehicles (diesel engine).
Sensor System
Used in washing machines for identifying loads and imbalances
Magnetic Coupling
Used as magnetic coupling to separate the power flow between motor and transmission of a hammer drill for accident protection.
Magnetic Coupling
Used for driving the electric hatchback of a car
Lifting Magnets
Used to start a keyless go function for opening a car without key (comfort function).
Solenoid Valves: Used to control gas volume
Used as gas rate adjuster for internal combustion engines that have been retrofitted for the combustion of liquid gas
Solenoid Valve: For switching underpressure/overpressure
Electric solenoid valve for switching underpressure/overpressure, with integrated seal seat
Solenoid Valves: For miniature hydraulic systems
Used for miniature hydraulic systems, for driving convertible top systems, for example
Complete Gear Unit
Complete gear unit for an electromotive throttle valve actuator application.
Overmoulded Shafts
Overmoulded shafts for damper actuators
Chip carrier
Sensor carrier for mass air flow meters used in vehicles
EMV Frames
Component to ensure electromagnetic compatibility, for electric cooling pumps in vehicles
Impeller
Impeller made of PPS with 40% glass fibre, equipped with a metallic hub bush, for transmitting torquein the drive unit. Application: Cooling pump for utility vehicles.
Sealing Bodies
Sealing bodies made of PEEK used as a sealing element for blow-off valves.